Magnetic Measurement Mount
- Mounts on any Helmholtz coils up to 16" in diameter
- Reliably and reproducibly holds a magnetic probe in place
- Designed to hold axial or transverse Teslamter probes
- 1 mm gradations for measurement of probe position
- Built entirely from non-magnetic materials
The Magnetic Measurement Mount is the perfect tool for mapping the field inside Helmholtz coils. With two axies of motion, the probe can be positioned anywhere on a plane inside the Helmholtz coils. Built in scales allow a student to quickly measure the magnetic field along the axis of the coils, or at any other point inside the coils. The probe can be rotated 90 degrees to easily measure any magnetic fields perpendicular to the axis of the coil. With a little patience, a student can easily create a full 3D map of the magnetic field inside a pair of Helmholtz Coils.
The Magnetic Measurement Mount requires two coils to balance correctly, but the magnetic field around a single coil can be mapped by only powering one of a pair of Helmholtz coils. When coupled with the TEL-2501 Universal Stand and the TEL-2502 Helmholtz Coils, the influence of coil spacing on magnetic field homogeneity can also be studied.
The magnetic measurement mount is sold both as a stand alone unit and coupled
with the TEL-SMS111U Teslameter 2000. The combination makes a complete system ready
to measure the magnetic field of your Helmholtz coils. The Teslameter is an
excellent stand alone magnetic sensor which also interfaces with a computer. You
will find it useful for a wide variety of tasks.
|TEL-SMS111M Magnetic Measurement Mount||$249.00|
|TEL-SMS111S Magnetic Measurement System||$999.00|